Archive

Archive for August, 2015

USIM command and file

August 24, 2015 Leave a comment

ATR | atr
Reset | reset
Format | A6F0000000 | reset
Virginize | A601000001FF | reset

USIM
SELECT FILE | print “00 A4 00 04 02 3F00”
STATUS | print “80 F2 00 00 00”
READ BINARY | print “00 B0 00 00 00”
UPDATE BINARY | print “00 D6 00 00 00”
READ RECORD | print “00 B2 00 00 00”
UPDATE RECORD | print “00 DC 00 00 00”
SEARCH RECORD | print “00 A2 00 00 00”
INCREASE | print “80 32 00 00 00”
RETRIEVE DATA | print “80 CB 00 00 00”
SET DATA | print “80 DB 00 00 00”
VERIFY | print “00 20 00 00 00”
CHANGE PIN | print “00 24 00 00 00”
DISABLE PIN | print “00 26 00 00 00”
ENABLE PIN | print “00 28 00 00 00”
UNBLOCK PIN | print “00 2C 00 00 00”
DEACTIVATE FILE | print “00 04 00 00 00”
ACTIVATE FILE | print “00 44 00 00 00”
AUTHENTICATE | print “00 88 00 00 00”
GET CHALLENGE | print “00 84 00 00 00”
TERMINAL CAPABILITY | print “80 AA 00 00 00”
TERMINAL PROFILE | print “80 10 00 00 00”
ENVELOPE | print “80 C2 00 00 00”
FETCH | print “80 12 00 00 00”
TERMINAL RESPONSE | print “80 14 00 00 00”
MANAGE CHANNEL | print “00 70 00 00 00”
MANAGE SECURE CHANNEL | print “00 73 00 00 00”
TRANSACT DATA | print “00 75 00 00 00”
GET RESPONSE | print “00 C0 00 00 00”

EF DF
MF | print “3F00”
DFGSM | print “7F20”
DFTELECOM | print “7F10”
EFDIR | print “2F00”
EFPL | print “2F05”
EFARR | print “2F06”
EFICCID | print “2FE2”
EFARR | print “6F06”
EFADN | print “6F3A”
EFFDN | print “6F3B”
EFSMS | print “6F3C”
EFECCP | print “6F4F”
EFMSISDN | print “6F40”
EFSMSP | print “6F42”
EFSMSS | print “6F43”
EFLND | print “6F44”
EFSMSR | print “6F47”
EFSDN | print “6F49”
EFEXT1 | print “6F4A”
EFEXT2 | print “6F4B”
EFEXT3 | print “6F4C”
EFBDN | print “6F4D”
EFEXT4 | print “6F4E”
EFSUME | print “6F54”
EFICE_DN | print “6FE0”
EFICE_FF | print “6FE1”
DFGRAPHICS | print “5F50”
EFIMG | print “4F20”
EFIIDFn | print “4FXX”
DFPHONEBOOK | print “5F3A”
EFPBR | print “4F30”
EFIAP | print “4FXX”
EFADN | print “4FXX”
EFEXT1 | print “4FXX”
EFPBC | print “4FXX”
EFGRP | print “4FXX”
EFAAS | print “4FXX”
EFGAS | print “4FXX”
EFANR | print “4FXX”
EFSNE | print “4FXX”
EFCCP1 | print “4FXX”
EFUID | print “4FXX”
EFPSC | print “4F22”
EFCC | print “4F23”
EFPUID | print “4F24”
EFEMAIL | print “4FXX”
DFMULTIMEDIA | print “5F3B”
EFMML | print “4F47”
EFMMDF | print “4F48”
EFPseudo | print “4F41”
EFUPLMNWLAN | print “4F42”
EF0PLMNWLAN | print “4F43”
EFUSSIDL | print “4F44”
EFOSSIDL | print “4F45”
EFWRI | print “4F46”
EFHWSIDL | print “4F47”
EFWEHPLMNPI | print “4F48”
EFWHPI | print “4F49”
EFWLRPLMN | print “4F4A”
DFPHONEBOOK | print “5F3A”
DFGSM-ACCESS | print “5F3B”
DFMExE | print “5F3C”
DFSoLSA | print “5F70”
DFWLAN | print “5F40”
EFORPK | print “4F41”
EFSAI | print “4F30”
EFSLL | print “4F31”
EFMExE-ST | print “4F40”
EFARPK | print “4F42”
EFTPRK | print “4F43”
EFTKCDF | print “4FXX”
EFKc | print “4F20”
EFKcGPRS | print “4F52”
EFCPBCCH | print “4F63”
EFinvSCAN | print “4F64”
EFUID | print “4FXX”
EFPSC | print “4F22”
EFCC | print “4F23”
EFPUID | print “4F24”
EFPBR | print “4F30”
EFCCP1 | print “4FXX”
EFIAP | print “4FXX”
EFADN | print “4FXX”
EFEXT1 | print “4FXX”
EFPBC | print “4FXX”
EFGRP | print “4FXX”
EFAAS | print “4FXX”
EFGAS | print “4FXX”
EFANR | print “4FXX”
EFSNE | print “4FXX”
EFEMAIL | print “4FXX”
EFLI | print “6F05”
EFARR | print “6F06”
EFIMSI | print “6F07”
EFKeys | print “6F08”
EFKeysPS | print “6F09”
EFDCK | print “6F2C”
EFHPPLMN | print “6F31”
EFCNL | print “6F32”
EFACMmax | print “6F37”
EFUST | print “6F38”
EFACM | print “6F39”
EFFDN | print “6F3B”
EFSMS | print “6F3C”
EFGID1 | print “6F3E”
EFGID2 | print “6F3F”
EFMSISDN | print “6F40”
EFPUCT | print “6F41”
EFSMSP | print “6F42”
EFSMSS | print “6F43”
EFCBMI | print “6F45”
EFSPN | print “6F46”
EFSMSR | print “6F47”
EFCBMID | print “6F48”
EFSDN | print “6F49”
EFEXT2 | print “6F4B”
EFEXT3 | print “6F4C”
EFBDN | print “6F4D”
EFEXT5 | print “6F4E”
EFCBMIR | print “6F50”
EFEXT4 | print “6F55”
EFEST | print “6F56”
EFACL | print “6F57”
EFCMI | print “6F58”
EFSTART-HFN | print “6F5B”
EFTHRESHOLD | print “6F5C”
EFPLMNwAcT | print “6F60”
EFOPLMNwAcT | print “6F61”
EFHPLMNwAcT | print “6F62”
EFEHPLMN | print “6FD9”
EFPSLOCI | print “6F73”
EFACC | print “6F78”
EFFPLMN | print “6F7B”
EFLOCI | print “6F7E”
EFICI | print “6F80”
EFOCI | print “6F81”
EFICT | print “6F82”
EFOCT | print “6F83”
EFAD | print “6FAD”
EFeMLPP | print “6FB5”
EFAAeM | print “6FB6”
EFECC | print “6FB7”
EFHiddenkey | print “6FC3”
EFNETPAR | print “6FC4”
EFPNN | print “6FC5”
EFOPL | print “6FC6”
EFMBDN | print “6FC7”
EFEXT6 | print “6FC8”
EFMBI | print “6FC9”
EFMWIS | print “6FCA”
EFCFIS | print “6FCB”
EFEXT7 | print “6FCC”
EFSPDI | print “6FCD”
EFMMSN | print “6FCE”
EFEXT8 | print “6FCF”
EFMMSICP | print “6FD0”
EFMMSUP | print “6FD1”
EFMMSUCP | print “6FD2”
EFNIA | print “6FD3”
EFCCP2 | print “6F4F”
EFVGCS | print “6FB1”
EFVGCSS | print “6FB2”
EFVBS | print “6FB3”
EFVBSS | print “6FB4”
EFVGCSCA | print “6FD4”
EFVBSCA | print “6FD5”
EFGBAP | print “6FD6”
EFMSK | print “6FD7”
EFMUK | print “6FD8”
EFGBANL | print “6FDA”
EFEHPLMNPI | print “6FDB”
EFLRPLMNSI | print “6FDC”
EFNAFKCA | print “6FDD”
EFSPNI | print “6FDE”
EFPNNI | print “6FDF”
EFNCP-IP | print “6FE2”
EFEPSLOCI | print “6FE3”
EFEPSNSC | print “6FE4”
DFHNB | print “5F50”
EFACSGL | print “4F81”
EFCSGI | print “4F82”
EFHNBN | print “4F83”
ADF | print “7FAA”

Clear | clear

Advertisements
Categories: Uncategorized

List Of SW1 SW2 in Smart Card

August 13, 2015 Leave a comment

6E00/E/Class not supported.
61–I/    /Response bytes still available
61XX/I/Command successfully executed; ‘XX’ bytes of data are available and can be requested using GET RESPONSE.
62–/W/State of non-volatile memory unchanged
6200/W/    No information given (NV-Ram not changed)
6201/W/    NV-Ram not changed 1.
6281/W/    Part of returned data may be corrupted
6282/W/    End of file/record reached before reading Le bytes
6283/W/    Selected file invalidated
6284/W/    Selected file is not valid. FCI not formated according to ISO
6285/W/    No Purse Engine enslaved for R3bc
62A2/W/    Wrong R-MAC
62A4/W/    Card locked (during reset( ))
62CX//    Counter with value x (command dependent)
62F1/W/    Wrong C-MAC
62F3/W/    Internal reset
62F5/W/    Default agent locked
62F7/W/    Cardholder locked
62F8/W/    Basement is current agent
62F9/W/    CALC Key Set not unblocked
62FX/W/    –
62XX//    RFU
63–/W/State of non-volatile memory changed
6300/W/    No information given (NV-Ram changed)
6381/W/    File filled up by the last write. Loading/updating is not allowed.
6382/W/    Card key not supported.
6383/W/    Reader key not supported.
6384/W/    Plaintext transmission not supported.
6385/W/    Secured transmission not supported.
6386/W/    Volatile memory is not available.
6387/W/    Non-volatile memory is not available.
6388/W/    Key number not valid.
6389/W/    Key length is not correct.
63C0/W/    Verify fail, no try left.
63C1/W/    Verify fail, 1 try left.
63C2/W/    Verify fail, 2 tries left.
63C3/W/    Verify fail, 3 tries left.
63CX//    The counter has reached the value �x� (0 = x = 15) (command dependent).
63FX/W/    –
63XX//    RFU
64–/E/State of non-volatile memory unchanged
6400/E/No information given (NV-Ram not changed)
6401/E/Command timeout.
64XX/E/    RFU
65–/E/State of non-volatile memory changed
6500/E/No information given
6501/E/Write error. Memory failure. There have been problems in writing or reading the EEPROM. Other hardware problems may also bring this error.
6581/E/Memory failure
65FX/E/-
65XX/E/    RFU
66–/S/
6669/S/Incorrect Encryption/Decryption Padding
66XX/S/    –
67–/E/
6700/E/Wrong length
67XX/E/    length incorrect (procedure)(ISO 7816-3)
68–/E/Functions in CLA not supported
6800/E/No information given (The request function is not supported by the card)
6881/E/Logical channel not supported
6882/E/Secure messaging not supported
6883/E/Last command of the chain expected
6884/E/Command chaining not supported
68FX/E/-
68XX/E/    RFU
69–/E/Command not allowed
6900/E/No information given (Command not allowed)
6981/E/Command incompatible with file structure
6982/E/Security condition not satisfied.
6983/E/Authentication method blocked
6984/E/Referenced data reversibly blocked (invalidated)
6985/E/Conditions of use not satisfied
6986/E/Command not allowed (no current EF)
6987/E/Expected secure messaging (SM) object missing
6988/E/Incorrect secure messaging (SM) data object
6996/E/Data must be updated again
69F0/E/Permission Denied
69F1/E/Permission Denied – Missing Privilege
69FX/E/-
69XX/E/    RFU
6A–/E/Wrong parameter(s) P1-P2
6A00/E/No information given (Bytes P1 and/or P2 are incorrect)
6A80/E/The parameters in the data field are incorrect.
6A81/E/Function not supported
6A82/E/File not found
6A83/E/Record not found
6A84/E/There is insufficient memory space in record or file
6A85/E/Lc inconsistent with TLV structure
6A86/E/Incorrect P1 or P2 parameter.
6A87/E/Lc inconsistent with P1-P2
6A88/E/Referenced data not found
6A89/E/File already exists
6A8A/E/DF name already exists.
6AF0/E/Wrong parameter value
6AFX/E/-
6AXX/E/    RFU
6B–/E/
6B00/E/Wrong parameter(s) P1-P2
6BXX/E/    Reference incorrect (procedure byte), (ISO 7816-3)
6C–/E/Wrong length Le
6C00/E/Incorrect P3 length.
6CXX/E/    Bad length value in Le; ‘xx’ is the correct exact Le
6D–/E/
6D00/E/Instruction code not supported or invalid
6DXX/E/    Instruction code not programmed or invalid (procedure byte), (ISO 7816-3)
6E–/E/
6E00/E/Class not supported
6EXX/E/    Instruction class not supported (procedure byte), (ISO 7816-3)
6F–/E/Internal exception
6F00/E/Command aborted – more exact diagnosis not possible (e.g., operating system error).
6FFF/E/Card dead (overuse, �)
6FXX/E/    No precise diagnosis (procedure byte), (ISO 7816-3)
9— /    /
9000/I/Command successfully executed (OK).
9004/W/    PIN not succesfully verified, 3 or more PIN tries left
9008/ /Key/file not found
9080/W/    Unblock Try Counter has reached zero
9101/ /States.activity, States.lock Status or States.lockable has wrong value
9102/ /Transaction number reached its limit
920x/I/Writing to EEPROM successful after ‘x’ attempts.
9210/E/Insufficient memory. No more storage available.
9240/E/Writing to EEPROM not successful.
9301/ /Integrity error
9302/ /Candidate S2 invalid
9400/E/No EF selected.
9401/ /Candidate currency code does not match purse currency
9402/ /Candidate amount too high
9402/E/Address range exceeded.
9403/ /Candidate amount too low
9404/E/FID not found, record not found or comparison pattern not found.
9405/ /Problems in the data field
9407/ /Bad currency : purse engine has no slot with R3bc currency
9408/ /R3bc currency not supported in purse engine
9408/E/Selected file type does not match command.
9580/ /Bad sequence
9681/ /Slave not found
9700/ /PIN blocked and Unblock Try Counter is 1 or 2
9702/ /Main keys are blocked
9704/ /PIN not succesfully verified, 3 or more PIN tries left
9784/ /Base key
9785/ /Limit exceeded – C-MAC key
9786/ /SM error – Limit exceeded – R-MAC key
9787/ /Limit exceeded – sequence counter
9788/ /Limit exceeded – R-MAC length
9789/ /Service not available
9802/E/No PIN defined.
9804/E/Access conditions not satisfied, authentication failed.
9835/E/ASK RANDOM or GIVE RANDOM not executed.
9840/E/PIN verification not successful.
9850/E/INCREASE or DECREASE could not be executed because a limit has been reached.
9900/ /1 PIN try left
9904/ /PIN not succesfully verified, 1 PIN try left
9985/ /Wrong status – Cardholder lock
9986/E/Missing privilege
9987/ /PIN is not installed
9988/ /Wrong status – R-MAC state
9A00/ /2 PIN try left
9A04/ /PIN not succesfully verified, 2 PIN try left
9A71/ /Wrong parameter value – Double agent AID
9A72/ /Wrong parameter value – Double agent Type
9D05/E/Incorrect certificate type
9D07/E/Incorrect session data size
9D08/E/Incorrect DIR file record size
9D09/E/Incorrect FCI record size
9D0A/E/Incorrect code size
9D10/E/Insufficient memory to load application
9D11/E/Invalid AID
9D12/E/Duplicate AID
9D13/E/Application previously loaded
9D14/E/Application history list full
9D15/E/Application not open
9D17/E/Invalid offset
9D18/E/Application already loaded
9D19/E/Invalid certificate
9D1A/E/Invalid signature
9D1B/E/Invalid KTU
9D1D/E/    MSM controls not set
9D1E/E/Application signature does not exist
9D1F/E/KTU does not exist
9D20/E/Application not loaded
9D21/E/Invalid Open command data length
9D30/E/Check data parameter is incorrect (invalid start address)
9D31/E/Check data parameter is incorrect (invalid length)
9D32/E/Check data parameter is incorrect (illegal memory check area)
9D40/E/Invalid MSM Controls ciphertext
9D41/E/MSM controls already set
9D42/E/Set MSM Controls data length less than 2 bytes
9D43/E/Invalid MSM Controls data length
9D44/E/Excess MSM Controls ciphertext
9D45/E/Verification of MSM Controls data failed
9D50/E/Invalid MCD Issuer production ID
9D51/E/Invalid MCD Issuer ID
9D52/E/Invalid set MSM controls data date
9D53/E/Invalid MCD number
9D54/E/Reserved field error
9D55/E/Reserved field error
9D56/E/Reserved field error
9D57/E/Reserved field error
9D60/E/MAC verification failed
9D61/E/Maximum number of unblocks reached
9D62/E/Card was not blocked
9D63/E/Crypto functions not available
9D64/E/No application loaded
9E00/ /PIN not installed
9E04/ /PIN not succesfully verified, PIN not installed
9F00/ /PIN blocked and Unblock Try Counter is 3
9F04/ /PIN not succesfully verified, PIN blocked and Unblock Try Counter is 3
9FXX/ /Command successfully executed; ‘xx’ bytes of data are available and can be requested using GET RESPONSE.
9XXX/ /Application related status, (ISO 7816-3)

Categories: smartcard